How to Pick the Right Infrared Lamp for Your Bathroom
When it comes to heating your bathroom, the instinct is usually to buy the most powerful lamp you can find. But here’s the thing: more power doesn’t always mean more comfort. It’s more about getting the right amount of heat in the right spot without wasting electricity. Our lamps work by sending heat directly to you, not by trying to warm up all the air in the room. It’s a much faster way to get cozy.
Finding Your Fit
If you’ve got a small bathroom—anything under 4m²—keep it simple. A single 250W to 400W lamp is plenty. If you go too high in a tiny space, it gets hot way too fast. You might even trip a safety switch, or worse, end up feeling like you’re in a sauna. For those medium-sized bathrooms (around 4m² to 8m²), I’d suggest a dual-lamp setup with 600W units. It spreads the warmth around better so you don’t have one “hot spot” and one “cold spot.” Then you have the big bathrooms or places with those high, airy ceilings. That’s where you need the heavy hitters—800W to 1000W lamps. You need that extra punch to make sure the heat actually reaches you before it fades away into the ceiling.
A Few Things to Keep in Mind
Higher wattage gets you warm faster. That’s the great part. But it also pulls more power from your electrical panel. If you’re planning to install a few 1000W units on one circuit, just double-check that your wiring can handle the load. You don’t want to be flipping breakers in the middle of a shower. We use quartz glass and halogen filaments to keep the heat steady. Just a heads-up: while a 1000W lamp kills the chill instantly, it works the filament harder. If you run them at full blast 24/7, they won’t last quite as long.
Pro Tips for a Warmer Room
Don’t just slap the lamp in the center of the ceiling. That’s a waste. Instead, put them exactly where you actually spend your time—like right over the shower or the vanity. By targeting the “dwell zones,” you can actually use a lower-wattage lamp and still feel just as warm. And a quick tip? Hook them up to a timer or a smart switch. There’s no point in paying to heat an empty room.